Top page > Product

Alignment system


PLC alignment system KS-502-AM

PLC alignment system KS-502-AM

It is the low price system of the automatic alignment system.
The application of UV adhesives is the type performed manually.
The automatic stage unit of six axes to the input fiber array side.
The automatic stage unit of six axes to the output fiber array side.
Automatic all the systems that carry out alignment about the fiber array, measurement of the contact distance of the wave guide, and parallel of the contact surface.

Of course, algorithm of automatic alignment etc, freely, it can do, and change and the addition can be performed and can respond also to two or more samples by calling the saved program.

PLC alignment system KS-502-AA

PLC alignment system KS-502-AA

It is the type which is automatic and performs all.
The application of UV adhesives is the type performed automatic.
The automatic stage unit of six axes to the input fiber array side.
The automatic stage unit of six axes to the output fiber array side.
Automatic all the systems that carry out alignment about the fiber array, measurement of the contact distance of the wave guide, and parallel of the contact surface.
Of course, algorithm of automatic alignment etc, freely, it can do, and change and the addition can be performed and can respond also to two or more samples by calling the saved program.

PLC evaluation alignment system KS-502-Measurement

PLC evaluation alignment system KS-502-M

It is the measurement system of the wave guide.
All N channels are measured automatically.
The automatic stage unit of six axes to the input fiber array side.
The automatic stage unit of six axes to the output fiber array side.
The automatic stage of one axis to the center position and wave guide side.
The wave guide located in a line is automatic in order, and is measured.
Automatic all the systems that carry out alignment about the fiber array, measurement of the contact distance of the wave guide, and parallel of the contact surface.
Of course, algorithm of automatic alignment etc, freely, it can do, and change and the addition can be performed and can respond also to two or more samples by calling the saved program.

LD/PD automatic alignment system KS-200-LP

LD/PD automatic alignment system KS-200-LP

The automatic stage unit (X, Y, rotation z) and welding part of three axes equip the package side (BTF/LD/PD) with gimbal of the mechanism made parallel.
The fiber side is equipped with the automatic stage unit's (Z, rotation z) of two axes.
The sleeve side of correspondence also in 3 piece type is equipped with the automatic stage unit.

Three YAG optical departments equip the automatic stage unit (Z, focus) of two axes separately.
The automatic stage of the stainless steel frame which KUGE makes has rigidity higher than the automatic stage of the ordinary aluminum frame.
The alignment stabilized since there was little heat expansion is possible for the automatic stage of the stainless steel frame which KUGE makes.

High power LD automatic alignment system KS-203-HP

High power LD automatic alignment system KS-203-HP

The alignment system which makes the parallel light from LD and the 1st lens, and mounts minute optical parts.
The parallel light measures the spreads angle / inclination angle from IR camera, and it carries out alignment to the optimal point.
The automatic stage of the stainless steel frame which KUGE makes has rigidity higher than the automatic stage of the ordinary aluminum frame.


The alignment stabilized since there was little heat expansion is possible for the automatic stage of the stainless steel frame which KUGE makes.

Light power monitor KOE-32

Light power monitor KOE-32

Completed, the measurement system of optical power loss of a wave guide and a fiber array.
The O/E converter of KUGE manufacture is the low price from ordinary power meter.

There is also application software of KUGE manufacture and preservation of data etc. is possible.
The measurement channel can be prepared with 32ch&64ch, and can also manufacture the number of channels which the customer wishes.

Back to Top

Aligning the various equipment


LD light source LD-1550 LD-1310

LD light source LD-1550 LD-1310

Making changes in low light, low-cost way of our own.
  Each wavelength and the output can be changed according to your
 wishes.

ASE light source ASE-I

ASE light source ASE-I

Light power output control type

O/E converter OE-32CH

O/E converter OE-32CH

Converts the electrical output 32 channels of optical output.
  You can change the output channels according to your specifications.

Stepping motor driver SMD-8 SMD-6 SMD-4 SMD-2 SMD-1

ステッピングモータードライバー DC-8,6,4,2,1

Only 5 phase stepper.
  High-resolution micro-can.
  The motor output channels can be produced according to customer
 specifications.

SUS stage KX-125 KX-100 KX-60

SUSステージ KX-120,100,60

Works by using micro-precision ball screws and precision cross-roller.
  The low thermal expansion stage high-rigidity stainless steel so.

Back to Top
Copyright(C) KUGE Co.,Ltd. All Rights Reserved.